Starting the Archimedean Solids at the Curious Minds Club (St Thomas of Canterbury Primary School, 28 February 2020)

Before half term we built all five Platonic Solids, in various materials, so this week at the Curious Minds Club we made a start on the 13 Archimedean Solids. The material was Polydron Frameworks. I gave a brief account of who Archimedes was.

I explained that we would start by truncating all five Platonic Solids, and that truncation meant slicing off every vertex. I gave each child a piece of paper I had prepared: it had a triangle drawn in pencil, with each edge marked into thirds. I labelled the markings A,A; B,B; and C,C, gave each child a pencil and ruler and asked them to join the letters and shade through the area near the vertex. I asked them how many edges the new shape had. They counted to six and told me the new shape was a hexagon. I pointed out that we started with three edges and ended with six edges; one boy was quick to tell me this meant we had doubled the number of edges. I picked up a Tetrahedron and said we were going to truncate it: the four faces that were triangles would now be hexagons, and we would need four new triangles to replace the old vertices. I gave each child four hexagons and four triangles and put a model of a Truncated Tetrahedron on the table for them to copy if needed. Every child was able to complete this activity quite quickly: some studied the model a lot, while others just glanced at it.

We then moved on to the Truncated Octahedron. The Octahedron’s eight faces are also triangles, so these are replaced by eight hexagons. The vertices are replaced by six squares. I had a model available for those who needed it.

Two Y6 children moved ahead of the others so I started them on the Truncated Cube. I gave them a square drawn in pencil, again with each edge marked into thirds. The markings were A,A; B,B; C,C; D,D. After joining the letters they knew they had made an octagon. I reminded them that they had doubled the number of edges. I gave them six octagons and eight triangles and they happily built this solid. I was unable to make a model: I only had enough octagons in my collection for two Truncated Cubes to be made at the same time. I was able to provide a picture.

I started a Y1 girl and a Y4 girl on making their own Truncated Dodecahedron. I gave them both 12 decagons and 20 triangles. This had to be done from a picture. The Y4 girl only needed a little assistance from me. The Y1 girl needed a bit more helping snapping the Polydron pieces into place, but she had no problem working out which piece went where. At the end of the session she took it to show her dad, and he looked very impressed. I was not surprised, as this is the second biggest of the 13 Archimedean Solids.

Meanwhile a girl in Y2 made a start on the Truncated Icosahedron. She used a picture to help her, and my tip that a pentagon is surrounded just by hexagons. She ran out of time, so I promised she could finish it next week. A girl in Y6 was able to complete this solid, and looked intrigued when I pointed out that this is the shape of a football.

My Y6 boy had noticed that I had brought with me a model of a Compound of Two Tetrahedra which I was keeping to one side in case I wanted to use it. I had used yellow and red triangles to really bring out the fact that it looks like two separate tetrahedra that have been spliced together. He asked if could make his own copy of it and I was happy to agree. He needed very little help from me, and I could tell he was really proud when he had finished.

I welcomed two new boys to my club this week, brothers from Y1 and Y5. After they had completed the Truncated Tetrahedron and Truncated Octahedron I decided to take them back to the Platonic Solids as they had missed these sessions. I started them on a Cube as I knew they would have seen one before. I showed them a net and got them to build it from there. I followed this with a Tetrahedron and an Octahedron. The Y1 boy did need some help in snapping the Polydron into place, but he got stuck into the activities with enthusiasm.

Below are some photos to enjoy.

Y1 girl. Truncated Dodecahedron; Truncated Tetrahedron; she sneaked in a Cube when I wasn’t looking.

Archimedean solids 28 Feb Y1 girl

 

Year 1 boy. Truncated Tetrahedron; Cube; Octahedron.

Archimedean solids 28 Feb Y1 boy

 

Year 5 boy. Cube; Octahedron; Truncated Tetrahedron.

Archimedean solids 28 Feb Y5 boy

 

Year 2 girl. Truncated Icosahedron (to be completed next week).

Archimedean solids 28 Feb Y2 girl

 

Y6 girl. Truncated Icosahedron; Truncated Octahedron; Truncated Cube.

Archimedean solids 28 Feb Y6 girl

 

Y4 girl. Truncated Dodecahedron; Truncated Octahedron; Truncated Tetrahedron.

Archimedean solids 28 Feb Y4 girl

 

Y6 boy. Two views of the Compound of Two Tetrahedra.

Archimedean solids 28 Feb Y6 boy 3 of 4Archimedean solids 28 Feb Y6 boy 2 of 4

What a collection! A Truncated Octahedron sitting on top of: Truncated Cube; containing a Truncated Tetrahedron; containing a Cube; containing a Tetrahedron.

Archimedean solids 28 Feb Y6 boy 4 of 4

 

Building some Platonic Solids to take home at the Curious Minds Club (St Thomas of Canterbury Primary School, 7 February 2020)

This week at the Curious Minds Club the children built models of the Platonic Solids to take home. In the previous two weeks I had given the children Polydron Frameworks and what I call a generic version of Geomag to make the Platonic Solids. These materials are expensive and I took them home at the end of the sessions. I wanted to give the children an opportunity to make models they could take home with them.

The materials I used were simple: plastic drinking straws and pipe cleaners. (I did ponder the ethics of plastic straws, as they are due to be banned in the UK in 2020; my conclusion was that I should use up the ones that currently exist before switching to paper). Feel free to contact me for details of the construction method. Once I showed the children how to build the models they took to it quickly. They enjoyed commenting on what the models looked like as they went along. When they were building a cube: “it looks like a laptop” and “I have made a table”.

Here are all five Platonic Solids that I made. (The session overran and there was no time to take photos of the children’s models). I think they look good in black. See how the pipe cleaners form the vertex:

20200213_111535

Here is each one by itself:

20200213_11180120200213_11181820200213_11175120200213_11195120200213_111844

They all look good …. until you get to the Dodecahedron above. This was a real struggle. My first attempt is below. The edge length is 75mm, the same as the others. It was hard to make every face look like a regular pentagon.

20200213_112133

I thought I would try making each edge half the length (75mm to 37mm) to see if this was easier. This is how it looked during construction:

The end result is below. It was the best I could manage. I manipulated a lot of the vertices by switching the pipe cleaners around. It goes concave in places but the whole thing should be convex.

20200213_111844

My conclusion is that drinking straws and pipe cleaners are a cheap and easy building material for building the Platonic Solids, if you can tolerate an imperfect Dodecahedron.

I also made a whole set using neon straws, but I don’t think they look as good as the black. You can see some gaps between the pipe cleaners inside the straws.

20200213_112115

Starting to build the Platonic Solids at the Curious Minds Club (St Thomas of Canterbury Primary School, 24 January 2020)

This week at the Curious Minds Club we focused on three dimensional space by starting to build the Platonic Solids.

I gave the children some Polydron equilateral triangles and showed them the net of a tetrahedron. They were able to build one quite quickly, then form it into a three dimensional object. Next up was the cube. Before handing them the pieces I asked the children if they could work out the cube’s alternative name, based on it having six faces. With a little prompting to think about which two dimensional object has six sides, one girl correctly suggested ‘hexahedron’. The children then constructed their Polydron cubes. I did not show them all 11 nets of a cube (an activity for a later date?) but let them figure it out for themselves. The next was the octahedron. I gave each child eight equilateral triangles and told them that four triangles meet at each vertex. They found this a little harder and I showed them one I had made earlier as a guide.

I decided to leave the final two Platonic solids (the dodecahedron and icosahedron) to next week as I thought it would be too much to attempt all five in one session. I got out some magnetic rods and balls (similar to Geomag but a generic version) and asked the children to make the tetrahedron, cube and octahedron in this material. The Polydron pieces are good at bringing out each face of the solid, but the generic Geomag are better at bringing out the vertex and edge.

Some of the children built quite large cubes with three rods forming an edge. They soon discovered that this made a wobbly and unstable cube, due to the degrees of freedom in a square. I encouraged them to use one rod for an edge, and they had more success this way.

Below are some of the children’s creations:

Collection Platonic Solids1

Collection Platonic Solids2

I had prepared some material on the symmetry of the Platonic solids. I showed one girl how to look at each object in three ways: face on, edge on and vertex on. I gave her two dimensional pictures of each object and a piece of mirror card, and asked her to find the lines of reflective symmetry for each object. She did really well at this activity and seemed to really enjoy looking at the objects in different ways.

We finished with a quick game of Dotty Dinosaurs. This week we played the colour matching version as a memory game.